室外铝材专用型粉末涂料

For aluminum powder coatings

-般介绍:采用羧基聚脂树脂制成的粉末涂料,通常被称为耐候型粉末涂料。主要用于建筑门窗、幕墙铝材、铝天花 板、飞机场户外设施、道路护栏、隔离装置、市政工程设施、灯箱、空调室外机、室外健身休闲器材、割草机等。 General introduction : This type of coating is prepared from carboxyl polyester resin. It is often called whetherable powder coating. Its applied range includes airfield facilities, road protective fence, separating unit, municipal engineering establishment, lamp shell, ail conditioner outdoor equipment, outdoor sport and leisure facilities, mower and so on.

产品系列:可提供高光(80%以上)、半光(50%-80% )、平光(20%-50% )和无光(20%以下)的产品.(可根据 用户的需求控制光泽)Product Series : Products of different gloss are available, high gloss (above 80%), semi gloss(50-80%), flat gioss(20-50%) and no gloss(below 20%). (The gloss can be adjusted according to the customers demand.)

粉末物理性能:比重(g/cnrP、25°C ) :1.4-1.7

粒度分布:100%小于100微米(可根据涂装的特殊要求进行调整)

Physical properties of the powder: Density(g/cm³,25°C):1.4-1.7

Granularity distribution:100%below 100μm(it can be adapted to the customers' demand)

固化条件:200°C (工件温度),10分钟

Curing Condition : 200°C(workpiece temperature), 10minutes


平均覆盖率:9-12平方米/公斤,膜厚60微米(以100%的粉末涂料使用率计算).

Average coating rate : 9-12㎡/kg, film thickness:60μm(calculated according to 100% consuming of powder coating)