抗静电型粉末涂料

Anti-static powder coatings

般介绍:抗静电型粉末涂料主要是由环氧、聚酯树脂及导电性佳的填料和金属粉等组成,主要用于抗静电和消除静 电。如医院手术室、计算机房、精密仪器等。

General introduction : Anti-static powder coatings is made from epoxy resin, polyester tesin, conductive filler and metal powder. It is mainly used on occasions like the surgery, computer operating room and precision equipments, which are in need of anti-static effect or static elimination.

产品系列:可提供室内和户外的深色、浅色导电型粉末涂料。

Product Series : Conductive powder coating of dark of light colors for indoor use and outdoor use are available.

粉末物理性能:比重(g/cm³、25°C ) :1.4-1.7

粒度分布:100%小于100微米(可根据涂装的特殊要求进行调整)

Physical properties of the powder: Density(g/cm³,25°C):1.4-1.7

Granularity distribution : 100%below 100pm(depending on the demand of art effects. It can be adapted to the specific demand of coating.)

固化条件:根据产品的树脂类型而定,具体请参观产品的随附说明。

Curing Condition : Depending on the types of different products. For detailed information, plese check the instruction book attached to our proucs.

平均覆盖率:8-10平方米/公斤,膜厚60微米(以100%的粉末涂料使用率计算)

Average coating rate :8-10㎡/kg, film thickness:60μm(calculated according to 100% consuming of powder coating)