聚氨酯型粉末涂料

Polyurethane powder coatings

一般介绍:采用羧基聚脂树脂制成的粉末涂料,具有优异的流平性、耐化学性、耐候性和很强的耐油性。适用于汽车、 摩托车、加油机和农业机械等对耐化学性、耐油性要求较高的金属外表的涂装。

General introduction : This type of powder coating is prepared from polyurethane resin . It has excellent leveling property and good resistance to chemicals, elements and oil. It can be applied in the coating on hard conditions, such as the coating for automobiles, motors, oiling machines and agricultural implements and machinery.



产品系列:做成高光(80%以上)、半光(50-80% )、平光(20-50% )和无光(20%以下)的产品(可根据用户的需 求控制光泽)。

Product Series : Products of different gloss are available, high gloss (above 80%), semi gloss(50-80%), flat gloss(20-50%) and no gloss(below 20%). (The gloss can be adjusted according to the customers' demand.)

粉末物理性能:比重(g/cm³、25°C ) :1.4-1.7

粒度分布:100%小于100微米(可根据涂装的特殊要求进行调整)。

Physical properties of the powder: Density(g/cm³,25°C):1.4-1.7

Granularity distribution:100%below 100μm(it can be adapted to the customers' demand)

固化条件:200°C (工件温度),10分钟

Curing Condition : 200°C(workpiece temperature), 10minutes

平均覆盖率:8-11平方米/公斤,膜厚70微米(以100%的粉末涂料使用率计算).

Average coating rate : 8-11㎡/kg, film thickness:70μm(calculated according to 100% consuming of powder coating)