纯聚酯型粉末涂料

Polyester powder coatings

一般介绍:采用羧基聚脂树脂制成的粉末涂料,可用于室外产品领域。如:存放于露天的电器设备外壳、建筑装潢、公 路护栏、户外家具、空调外机等。(可分为含TGIC或不含TGIC-free两类产品)。

General introduction : This type powder coating is prepared from polyester resin; it can be used in the coating for outdoor products, such as the shell surface coating for outdoor electrical equipments, construction decorating and highway protective fence.




产品系列:可做成高光(80%以上)、半光(50-80%)、平光(20-50% )和无光(20%以下)的产品(可根据用户的 需求控制光泽)。

Product Series : Products of different gloss are available, high gloss (above 80%), semi gloss(50-80%), flat gloss(20-50%) and no gloss(below 20%). (The gloss can be adjusted according to the customers, demand.)

粉末物理性能:比重(g/cm³、25°C ) :1.4-1.7

粒度分布:100%小于100微米(可根据涂装的特殊要求进行调整)

Physical properties of the powder: Density(g/cm³,25°C):1.4-1.7

Granularity distribution:100%below 100μm(it can be adapted to the customers' demand)

固化条件:200°C (工件温度),10分钟

Curing Condition : 200°C(workpiece temperature), 10minutes

平均覆盖率:8-11平方米/公斤,膜厚70微米(以100%的粉末涂料使用率计算).

Average coating rate : 8-11㎡/kg, film thickness:70μm(calculated according to 100% consuming of powder coating)