环氧/聚酯混合型粉末涂料

Epoxy polyester powder coatings

一般介绍:采用环氧树脂和聚酯树脂为主要原材料制备而成,同时具备两者各自独特的性能,使生产出来的涂料具有极佳的装饰性、机械性能和较强的耐腐蚀性,广泛应用于各种室内金属制品的涂装。

General introduction:This type of powder coating is prepared from the epoxy and polyester resin . It has the merits of the two coatings, which makes the filmspreapared from this type of coating more decorative and gives it good mechanical properties and anti-corrosive properly . It is widely applied in the coating for indoor metallic appliances.

产品系列:可提供标准型和低温固化型粉末涂料产品。可做成高光(80%以上)、半光(50-80%)、平光(20-50%)和无光(20%以下)的产品(可根据用户的需求控制光泽)。

Product Series:Standard and low temperature solidification 。

 粉末物理性能:比重(g/cm³、25°C ) : 1.4-1.7

粒度分布:100%小于100微米(可根据涂装的特殊要求进行调整).

Physical properties of the powder:Density(g/cm³,25°C ): 1.4-1.7

Granularity distributions 100%below 100μm (it can be adapted to the customers demand)

固化条件:标准型200°C (工件温度),10分钟

低温固化型160°C (工件温度),15分钟

Curing Condition : Standard type 200°C(workpiece temperature), 10minutes

low temp curing type 160°C(workpiece temperature), 15minutes

平均覆盖率:9-12平方米/公斤,膜厚60微米(以100%的粉末涂料使用率计算).

Average coating rate : 9-12㎡/kg, film thickness:60μm  (calculated according to 100% consuming of powder coating)