环氧防腐型粉末涂料

Epoxy powder coatings

一般介绍:采用环氧树脂等防腐材料制备而成,具有优异的耐化学品性和机械性,用于对耐腐蚀性、绝缘性和柔韧性有较高要求的金属制品的涂装。一般不建议直接用于各种户外用品的表面涂装。主要用于输油管道及化工设备的防腐涂装。

General Introduction : This type of coating is prepa red from the epoxy resinand it has excellent chemical resistance and good mechanical prope  rties.It is suiltable for the coating of metallic appliances that has rigor demand on the anti-corrosion , insulating properties and flexibility.It is suggested to use this type of coating directly In the coating for outdoor appliances.

产品系列:可提供标准型和低温固化型粉末涂料产品

Product Series : Standard and low temperature solidification type powder coating can be provided.

粉末物理性能:比重(g/cm³、25°C ) : 1.4-1.7

粒度分布:100%小于100微米(可根据涂装的特殊要求进行调整)

Physical propartlec of the powder: Density(g/cm³,25°C): 1.4-1.7

Granularity distribution : 100%below 100μm(It can be adapted to the customers'demand)

固化条件:A型   200°C(工件温度),10分钟

                 B型   180°C(工件温度),15分钟

C型   140°C(工件温度),20分钟

Curing Condition : 

Type A   200°C(workpiece temperature), 10minutes(flat gloss or no gloss)

 Type B 180°C(workpiece temperature), 15minutes(high gloss or semi gloss)

Type C 140°Cworkpiece temperature),20minutes(high gloss)

平均覆盖率:9-12平方米/公斤,膜厚60微米(以100%的粉末涂料使用率计算)。

Average coating rate : 9-12m³/kg. film thickness:60μm (calculated according to 100% consuming of powder coating)